RSS

Lab 7.3.6 Identifying Risks and Weaknesses in the Design

Task 1: Identify areas of risk and weakness in the server farm implementation

Step 1: Analyze the physical topology
Examine the server farm topology as one entity and as a part of the entire FilmCompany topology. Look for each of the risks and weaknesses listed in the chart. Describe the devices, connections, and issues that you find, or record None found if the design appears to avoid risks in that area.
Weakness
Risk
Description of Location and Devices
Single point of failure
If a device fails, a portion of the network will be inoperable.

Large failure domain
If a device or link fails, a large portion of the network will be affected

Possible bottlenecks
If the traffic volume increases, there
is a potential for response time to
degrade.

Limited scalability
If the network grows more rapidly than expected, a costly upgrade will be needed.

Overly-complex design
If the design is too complex, the current staff will not be able to support it properly.

Other possible
weaknesses (specify):



Step 2: Analyze the results and conclusions of the testing
Basic router and switch configurations were modified to support the following protocols and functions.
Evaluate the results and conclusions that were drawn from the testing. Identify any areas where modifications to the configuration would provide better results, both now and in the future.

No Change Needed
Modifications Possible
VLAN port assignments


VTP client/server assignments


Root bridge designations


Switch security


Traffic filtering through ACLs


Other (specify):




Task 2: Suggest modifications to the design to address identified risks and weaknesses
From the analysis performed in Task 1, list each risk or weakness and suggest possible changes to the
design to minimize or eliminate it.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

0 comments:

Post a Comment